- Joined
- Jan 24, 2011
- Messages
- 246
- Reaction score
- 42
Just wondering if anyone can point me in the right direction to get a tach cable with two of the 5/8 ends on it. I have a tach in the front and rear panels and have run the main tach cable from the engine to a dual tach adapter in the rear cockpit. Both sodes of the dual adapter use the 5/8 fitting as does the tach in the front cockpit. Went to Aircraft Spruce and though I could hav a custom cable made but their supplier only makes cables with a 7/8 connection on the engine side and a 5/8 on the tach side. How have all the other two holers handled this problem or maybe it is not a problem just I took a wrong turn.
Thanks,
Tad
Thanks,
Tad